“Home inspections.. with absolute character and integrity.”

Mold in your home

Molds can be found almost anywhere; they can grow on virtually any organic substance, as long as moisture and oxygen are present. There are molds that can grow on wood, paper, carpet, foods, and insulation. When excessive moisture accumulates in buildings or on building materials, mold growth will often occur, particularly if the moisture problem remains undiscovered or unaddressed. It is impossible to eliminate all mold and mold spores in the indoor environment. However, mold growth can be controlled indoors by controlling moisture indoors.

Do I need to test for Mold?

Although a standard home inspection does not include a specific test for mold, we do keep our eyes open for potential risks for mold. In general we recommend having a standard inspection performed and if suspect areas of mold are discovered, then a specific test for mold may be suggested. For those that have asthma or serious allergies, it is always a good idea to do an air quality test.

Mold on drywall under leaky sink. (photo courtesy of John Martyny, Ph.D.)

Mold on ceiling. (photo courtesy of Terry Brennan)

Ten Things You Should Know About Mold

  1. Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma, and other respiratory complaints.
  2. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
  3. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
  4. Fix the source of the water problem or leak to prevent mold growth.
  5. Reduce indoor humidity (to 30-60%) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning.
  6. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
  7. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
  8. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
  9. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
  10. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.